2021-01-22, 06:19 PM
You could try an output from Signalk > https://github.com/SignalK/signalk-serve...tting-Data
Remove the serial connection to the nasa from opencpn and set it up as a connection in signalk with nmea0183out as output events, then activate the signalk-nmea and select RMC. Not tried this so good luck!
Remove the serial connection to the nasa from opencpn and set it up as a connection in signalk with nmea0183out as output events, then activate the signalk-nmea and select RMC. Not tried this so good luck!