This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
iPhone USB tethering problems
#6
There is nothing connected. My understanding is that eth0 is the physical ethernet port. Just checked it by plugging a cable in and an IP got assigned and internet works through the wired connection.

I got eth1 to show up in the sharing internet dropdown by having the iPhone connected to USB before powering up the pi. Selecting eth1 or Auto makes no difference, still no internet through USB tether.

Thanks for trying to help.


(2021-03-08, 05:50 PM)e-sailing Wrote: If the raspberry doesn't get internet when you have the ifconfig output as shown above, you have a route problem. It is independent of the sharing settings. What does route -a say?

Thanks for the tip on sharing settings. route -a says the following which is wayyyy over my head :-)

route: invalid option -- 'a'
Usage: route [-nNvee] [-FC] [<AF>]           List kernel routing tables
       route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.

       route {-h|--help} [<AF>]              Detailed usage syntax for specified AF.
       route {-V|--version}                  Display version/author and exit.

        -v, --verbose            be verbose
        -n, --numeric            don't resolve names
        -e, --extend             display other/more information
        -F, --fib                display Forwarding Information Base (default)
        -C, --cache              display routing cache instead of FIB

  <AF>=Use -4, -6, '-A <af>' or '--<af>'; default: inet
  List of possible address families (which support routing):
    inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25) 
    netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP) 
    x25 (CCITT X.25)
Reply


Messages In This Thread
iPhone USB tethering problems - by SimonLew - 2021-03-06, 08:35 PM
RE: iPhone USB tethering problems - by holgerw - 2021-03-07, 05:57 PM
RE: iPhone USB tethering problems - by SimonLew - 2021-03-08, 01:31 AM
RE: iPhone USB tethering problems - by holgerw - 2021-03-08, 08:02 AM
RE: iPhone USB tethering problems - by e-sailing - 2021-03-08, 05:50 PM
RE: iPhone USB tethering problems - by SimonLew - 2021-03-08, 05:58 PM
RE: iPhone USB tethering problems - by SimonLew - 2021-03-08, 08:00 PM
RE: iPhone USB tethering problems - by e-sailing - 2021-03-10, 04:37 PM
RE: iPhone USB tethering problems - by SimonLew - 2021-03-11, 01:48 AM
RE: iPhone USB tethering problems - by e-sailing - 2021-03-11, 01:10 PM
RE: iPhone USB tethering problems - by SimonLew - 2021-03-11, 07:36 PM
RE: iPhone USB tethering problems - by holgerw - 2021-03-11, 01:14 PM
RE: iPhone USB tethering problems - by e-sailing - 2021-03-11, 01:26 PM
RE: iPhone USB tethering problems - by andy kopac - 2022-05-03, 10:30 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)