This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem with GPIO push button inputs following Pypilot upgrade
#17
It looked as if the issue has been resolved and so I re-installed Pypilot 0.24. If I run pypilot_hat the web page on 33333 does appear but it is not connected to pypilot. Still errors when I run pypilot_hat but the GPIO push buttons now work! Hooray!!!

pi@openpcpn:~ $ pypilot_hat
have gpio for raspberry pi
loading config file: /home/pi/.pypilot/hat.conf
failed to load /proc/device-tree/hat/custom_0 : [Errno 2] No such file or directory: '/proc/device-tree/hat/custom_0'


pi@openpcpn:~ $ pypilot_hat none
have gpio for raspberry pi
loading config file: /home/pi/.pypilot/hat.conf
failed to load /proc/device-tree/hat/custom_0 : [Errno 2] No such file or directory: '/proc/device-tree/hat/custom_0'
overriding driver default to command line none
arduino process on 1308
renice: failed to set priority for 1308 (process ID): Permission denied
warning, failed to renice hat arduino process
No hat config, arduino not found
1309 (process ID) old priority 0, new priority 19
failed to load lirc No module named '_client'
no lirc available No module named 'pylirc'
failed to load lirc No module named '_client'
no lirc available No module named 'pylirc'
web process 1309
web config {'remote': False, 'host': 'pypilot', 'actions': {'auto': [], 'menu': [], 'up': [], 'down': [], 'select': [], 'left': [], 'right': [], 'engage': ['gpio17'], 'disengage': ['gpio23'], '1': ['gpio27'], '-1': ['gpio22'], '2': [], '-2': [], '10': ['gpio5'], '-10': ['gpio6'], 'compassmode': ['gpio18'], 'gpsmode': [], 'windmode': ['gpio26'], 'tackport': [], 'tackstarboard': []}, 'pi.ir': True, 'arduino.ir': False, 'arduino.nmea.in': False, 'arduino.nmea.out': False, 'arduino.nmea.baud': 4800, 'lcd': {'contrast': 60, 'invert': False, 'backlight': 200, 'flip': False, 'language': 'en', 'bigstep': 10, 'smallstep': 1, 'remote': False, 'hue': 27}}
web process on port 33333
The client is using an unsupported version of the Socket.IO or Engine.IO protocols (further occurrences of this error will be logged with level INFO)
failed to load lirc No module named '_client'
no lirc available No module named 'pylirc'
failed to load lirc No module named '_client'
no lirc available No module named 'pylirc'
Reply


Messages In This Thread
RE: Problem with GPIO push button inputs following Pypilot upgrade - by drbarritt - 2021-04-11, 09:30 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)