2017-05-14, 10:48 AM
With the last versions of fdxread and openplotter/alpha, I tried :
fdxread ~/fdxread/dumps/onsdagsregatta-2016-08-17.dump | nc -u localhost 10110
and it works and is visible in NMEA diagnostic
I must work with USB
fdxread /dev/ttyOP_FDX | nc -u localhost 10110
(ttyOP_FDX is a name created wit USB manager)
I plan to do about the same thing as you tried.
In fact I have no GND10 but a WSI box.
I plan and HOPE to :
- connect my RPI3 with an USB RS485 cable on the yellow/white of the Nexus network
- use fdxread to translate FDX protocol into NMEA or SIGNALK
- add a tool into openplotter to have fdxread in the Tools menu
I will work on it next weeks ....
fdxread ~/fdxread/dumps/onsdagsregatta-2016-08-17.dump | nc -u localhost 10110
and it works and is visible in NMEA diagnostic
I must work with USB
fdxread /dev/ttyOP_FDX | nc -u localhost 10110
(ttyOP_FDX is a name created wit USB manager)
I plan to do about the same thing as you tried.
In fact I have no GND10 but a WSI box.
I plan and HOPE to :
- connect my RPI3 with an USB RS485 cable on the yellow/white of the Nexus network
- use fdxread to translate FDX protocol into NMEA or SIGNALK
- add a tool into openplotter to have fdxread in the Tools menu
I will work on it next weeks ....