2021-05-06, 08:48 PM
(2021-05-04, 10:48 PM)Techstyle Wrote: I would go back now and reconstruct you OpenCPN connection:
Below is how I have mine connected
1 and 3 were correct:
Quote:1- Network - TCP
Localhost
Data Port 10110
Priority 1
Control Check Sum - selected
Receive Input on this port - selected
Output on this port - not selected
3- Network - UDP
Localhost
Data Port 10119
Comment - OpencpnOUT
Priority 1
Control Check Sum - selected
Receive Input on this port - not selected
Output on this port - selected
Input Filtering- Accept only Sentences - selected
Out Filtering - Transmit Sentences -RMB,APB
Do not do 2. I add XTE to the transmit sentence, but it is buried elsewhere
In SignalK
Quote:OpencpnOUT
NMEA0183
NMEA 0183 Source - UDP
Port 10119
Sentence Event N- nmea0183out
Validate Checksum - yes
Ignore Sentences RMB, APB
leave sentence event blank for now and don't ignore the only sentences being sent by OpenCPN!
Thanks for the advice Techstyle, very helpful. I have made the changes you have recommended
Regards
D