2022-04-07, 02:13 AM
Perhaps not "any" 433mhz will work, but I have not found one that does not work.
That remote probably works, if not it will almost certainly work by tweaking the sketch on the hat, but I make no guarente.
what else onboard uses 433? There are 24 bit codes so as long as they use different codes it should be ok.
You could configure for "big port" "big starboard" then in the menu configure these to do 20 degree changes.
That remote probably works, if not it will almost certainly work by tweaking the sketch on the hat, but I make no guarente.
what else onboard uses 433? There are 24 bit codes so as long as they use different codes it should be ok.
You could configure for "big port" "big starboard" then in the menu configure these to do 20 degree changes.