2021-08-05, 01:25 PM
So with a 1.2k Ohm between R_IS/L_IS & ground..
2.9A on load = 0.534v on IS pin.
470 Ohm ,
3.34A = 0.258v
So might just stick with 470 Ohm for now & calibrate to that, doubt if I'll pull over 10A.
2.9A on load = 0.534v on IS pin.
470 Ohm ,
3.34A = 0.258v
So might just stick with 470 Ohm for now & calibrate to that, doubt if I'll pull over 10A.