2021-11-27, 07:17 AM
(2021-11-26, 04:58 PM)stelian Wrote: My tinypilot image based on tinycore 13.1.0 is available here: https://www.popies.net/pypilot/tinypilot...126.img.xz
MD5: https://www.popies.net/pypilot/tinypilot...img.xz.md5
I measured the boot time, it is quite equivalent to the tinycore 9 based image on a Pi Zero (more or less 1 minute from start to wifi available).
On a Pi Zero 2 the boot time is divided by 2: 30s (and I kept the delays in bootlocal.sh, I think these delays can be removed for a pi zero 2 and have a quicker boot).
I haven't measured the current consumption with the pi zero 2 board yet...
well it is normally 15 seconds until boot image, then 15 more to a state it can be engaged. It takes a bit longer for wifi, and longer for other services.
Good to know the gpsd problem is resolved.
I wonder if it's possible to completely shut down some cores after boot to save power.