Hi Stellian, no, I was talking of the radio frequency control sold by Sean (I have not used the right shortcut). I like it, mainly now with the new 8 buttons item.
But with your release, on the web interface (IP 192.168.14.1 on wifi), I am not able to get other tab that "Control" with the Raspi Openplotter (network configured as AP and Station, add Ethernet Port activated). If I try to go on an other tab, I get only the following lines (and I am unable to revert to the control tab) :
pypilot server: Connected
Sservo Flags:
Autopilot Errors:
Web Server Larency: 36.x ms
With my laptop running W8, it's working fine.
By the way, like with Sean's beta release there is no more possibility to choose the mode (Compass, GPS or Wind) with the RF control.
Many thanks for your attention.
Eric
But with your release, on the web interface (IP 192.168.14.1 on wifi), I am not able to get other tab that "Control" with the Raspi Openplotter (network configured as AP and Station, add Ethernet Port activated). If I try to go on an other tab, I get only the following lines (and I am unable to revert to the control tab) :
pypilot server: Connected
Sservo Flags:
Autopilot Errors:
Web Server Larency: 36.x ms
With my laptop running W8, it's working fine.
By the way, like with Sean's beta release there is no more possibility to choose the mode (Compass, GPS or Wind) with the RF control.
Many thanks for your attention.
Eric