New Py Zero 2 W is Out!

[stelian]

@hans-martijn

Hmm, in a previous post Erickalon said that signalk was working fine for him.

I wonder if the issues could be caused by something at startup (boot delays ?).

Please try the following:
- start your signalk server, and tinypilot
- wait a few minutes for boot to end
- at this point, as you reported, signalk is not working, right ?
- log in to the tinypilot over SSH
- in the SSH console, type 'sudo sv stop pypilot ; pypilot'
- tell us if it works now, and if it does not paste the startup logs

@Erickalon:

---

Hi Stellian, I would like to test your new pypilot.tcz but I don't know the installation process. My progression in Tinycore use is very slow... Can you please explain me how do?
The running configuration works rather well, but the SignalK connection operate only if if reboot both equipment together. Once connected, that is ok.
Thanks, Eric

@Erickalon,

You need to replace the pypilot.tcz file in /mnt/mmcblk0p2/tce/optional/ with the one downloaded from my site.

You have several possibilities for doing that, the easiest is to copy it using the ssh/scp procotol. If you have a Linux computer, this can be done using something like:

Code:

scp pypilot.tcz tc@192.168.14.1:/mnt/mmcblk0p2/tce/optional/

The same can be done from a Windows computer but it's a bit more complicated since you need a scp software like WinSCP