Hi Erickalon,
I see this:
zeroconf addresses ['10.10.10.167', '10.10.10.167', '192.168.14.1', '127.0.0.1']
This means you run in Master+Managed mode.
Can you please try with the network set to AP or client mode (either one of them will do, just not both).
I did saw some strange things happening with the Master+Managed mode enabled, and I'm not sure the cause is in the tinypilot networking scripts or some kind of network loop...
later edit: I remember now that you are using ethernet, so 10.10.10.167 is probably your ethernet address not the client mode wifi address. So my comment above does not apply. Still, I believe your problem could be caused by some network configuration issue
I see this:
zeroconf addresses ['10.10.10.167', '10.10.10.167', '192.168.14.1', '127.0.0.1']
This means you run in Master+Managed mode.
Can you please try with the network set to AP or client mode (either one of them will do, just not both).
I did saw some strange things happening with the Master+Managed mode enabled, and I'm not sure the cause is in the tinypilot networking scripts or some kind of network loop...
later edit: I remember now that you are using ethernet, so 10.10.10.167 is probably your ethernet address not the client mode wifi address. So my comment above does not apply. Still, I believe your problem could be caused by some network configuration issue