This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Depth Sounder + OpenPlotter on Rapsberry 4: How does it work? What parts do I need?
#1
Hello,

I have OpenPlotter installed on a Raspberry 4 and also already connected a few sensors (GPS,temperature, air pressure). Now I would like to integrate a depth sounder. To this topic I ask myself these questions:

1. how does it work with the echosounder with OpenPlotter in principle? Do I import the data for the depth indication in OpenPlotter directly from a transducer? Or do I need a terminal device in addition to the transducer, which interprets the depth data and from which OpenPlotter then fetches the data via NMEA?  
 
2) Which specific echosounders with in-hull transducers can be integrated into OpenPlotter reasonably easily? (By "easy" I mean that you can do it even as an interested layman who is not a programmer).

Who can help me, an OpenPlotter beginner, with these questions and explain to me how this works and possibly also give me tips on which devices I need?

Many thanks in advance,
Rüdiger
Reply
#2
Hi Rüdiger,

Most commonly, transducers either
(1) convert their data onto a standard bus such as NMEA2000, for example https://www.p2marine.com/airmar-nmea2000...ransducers
(2) like (1), but connects to NMEA0183: https://www.p2marine.com/airmar-nmea-018...ransducers
(3) connect to a conversion unit that then has s standard bus interface, example: ITC-5 as component in this package: https://seatech.systems/product/raymarin...systempack

Thus the important question is: which interface standard does your transducers connects to.

Any NMEA0183 device connects to the Raspberry PI running Open Plotter as a serial interface, usually through a serial-to-USB converter.

Something as simple as this oftenn works just fine: https://www.amazon.com/Sipytoph-CP2102-C...s=1&sr=8-4

Or if you have challenges with grounding throughout your boat you may have to resort to using a differential signal based serial to USB converter. This differential signal standard is called RS422. So an RS422-to-USB adaptor like
https://www.newegg.com/p/1XZ-00RR-00001?...YT8FK86950

If your transducers connects to an NMEA2000 network, you need to have an NMEA2000-to-USB adaptor, examples:
https://actisense.com/products/ngt-1-nme...interface/
or you get a NMEA2000 hat to put on your Raspberry PI:
https://openplotter.readthedocs.io/en/la...n_app.html

Enjoy the ride. Lots of things to learn!
Reply
#3
Hallo beercansailor!

Big thanks for the quick, informative and understandable answer! It's info like this that helps me, as a beginner and IT layman, get familiar with OpenPlotter and the many great applications you can master with it.

Two things are clear to me now:
1. it depends on the "right" transducer.
2. an additional echo sounder terminal is not necessary. For that I have my Raspberry and OpenPlotter.

So, now I'll first have a look at the links you recommended.
Thanks again!
Rüdiger
Reply
#4
(2021-12-07, 11:37 AM)aliento-rvs Wrote: Hallo beercansailor!

Big thanks for the quick, informative and understandable answer! It's info like this that helps me, as a beginner and IT layman, get familiar with OpenPlotter and the many great applications you can master with it.

Two things are clear to me now:
1. it depends on the "right" transducer.
2. an additional echo sounder terminal is not necessary. For that I have my Raspberry and OpenPlotter.

So, now I'll first have a look at the links you recommended.
Thanks again!
Rüdiger

Hi Rüdiger, if you want to buy in Germany, please have a look at SVB-Bremen
https://www.svb.de/de/kategorie/elektron...soren.html

Immer eine Handbreit Wasser unter dem Kiel

Ralf
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)