Hi all,
I just installed a new AIS Transceiver, which is connected to OpenPlotter with a CAN adapter to receive NMEA2000. It seems to be working great - all the SignalK AIS keys appear in the data browser (self and other ships), and on OpenCPN, which is connected to the SignalK stream.
My problem is that I'm not getting that same AIS data on NMEA0183 output. Everything else is fine - I can connect, as a test, OpenCPN to OpenPlotter via TCP port 10110 and GPS data is there, as well as pretty much everything else, except AIS. In my case, GPS is coming from my AIS transciever, so I'm sure that part is going through okay.
AIS isn't there. I can open the NMEA debug window and everything is coming in, except AIS strings.
I need this data via NMEA0183 as I'm using a tablet with Navionics, and it looks for those strings to display AIS on the tablet.
Anyone have any ideas?
Andy
I just installed a new AIS Transceiver, which is connected to OpenPlotter with a CAN adapter to receive NMEA2000. It seems to be working great - all the SignalK AIS keys appear in the data browser (self and other ships), and on OpenCPN, which is connected to the SignalK stream.
My problem is that I'm not getting that same AIS data on NMEA0183 output. Everything else is fine - I can connect, as a test, OpenCPN to OpenPlotter via TCP port 10110 and GPS data is there, as well as pretty much everything else, except AIS. In my case, GPS is coming from my AIS transciever, so I'm sure that part is going through okay.
AIS isn't there. I can open the NMEA debug window and everything is coming in, except AIS strings.
I need this data via NMEA0183 as I'm using a tablet with Navionics, and it looks for those strings to display AIS on the tablet.
Anyone have any ideas?
Andy