2022-01-11, 10:01 AM
(2022-01-10, 07:07 PM)PaddyB Wrote:(2022-01-10, 01:51 PM)yvereg Wrote: Thanks for your answers. I confirm:
-the automatic server search in opencpn is off
-my user belongs to dialout group
regards
Does tcp port 10.10.10.1 port 10110 work as a connection in opencpn (Try with no other connections) ? Signalk should be sending out nmea0183 on that port.
Hello,
At the installation time of openplotter this connection is declared:
network/input/signalk/openplotter.local/3000 I do not understand the aim of this connection.
As you suggest I enter a connection declared:
network/input/tcp/openplotter.local/10110, unfortunatly no gps messages are received in opencpn.
does such command correct to display what is output of signalK?
cat </dev/tcp/10.10.10.1/10110
if the answer is yes, no messages are displayed meaning nothing is output from signalk
Regards