2022-05-07, 12:25 PM
(2022-02-26, 01:46 PM)Sailoog Wrote:I am having the same issue as John1270. Had this problem to begin with. I tried formating new image and still getting the same result after installation and reboot.(2022-02-26, 12:03 AM)John1270 Wrote: I am using openplotter v3, 64bit flat pak. I downloaded some charts and everything was good, I tried to download more charts but they wouldn’t download. I reboot and tried again, no charts, the red outline of the charts are there but no chart? Maybe I’m missing something so I shut it down, restarted and ran a system check. Message is “unable to read opencpn fp configuration” can you point me in the right direction? Thank you for all of your help so far!!! Total newby here, love the system!
What charts are you installing? if you are using o-charts you should use the dongle or you will probably lose your licenses soon with this alpha version.
if you get “unable to read opencpn fp configuration” it means that opencpn flatpak is installed but you have not ran it yet and the conf file has not been created. Please open a terminal and type:
Code:flatpak run org.opencpn.OpenCPN
copy here the result
Code:pi@openplotter:~ $ flatpak run org.opencpn.OpenCPN
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_headpho.pcm.front.0:CARD=0'
ALSA lib conf.c:4745:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5233:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM front
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround40
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround41
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround50
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround51
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_headpho.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4745:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5233:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM iec958
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_headpho.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4745:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5233:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM spdif
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'cards.bcm2835_headpho.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
ALSA lib conf.c:4745:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5233:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM spdif
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib ../../oss/pcm_oss.c:377:(_snd_pcm_oss_open) Unknown field port
ALSA lib ../../oss/pcm_oss.c:377:(_snd_pcm_oss_open) Unknown field port
ALSA lib ../../usb_stream/pcm_usb_stream.c:486:(_snd_pcm_usb_stream_open) Invalid type for card
ALSA lib ../../usb_stream/pcm_usb_stream.c:486:(_snd_pcm_usb_stream_open) Invalid type for card
ALSA lib pcm_direct.c:2014:(snd1_pcm_direct_parse_open_conf) The field ipc_gid must be a valid group (create group audio)
14:13:37: Debug: Device: 0: bcm2835 Headphones: - (hw:0,0)
14:13:37: Debug: Device: 1: sysdefault
14:13:37: Debug: Device: 2: pulse
14:13:37: Debug: Device: 3: speex
14:13:37: Debug: Device: 4: upmix
14:13:37: Debug: Device: 5: vdownmix
14:13:37: Debug: Device: 6: default
14:13:37: Debug: Device: 0: bcm2835 Headphones: - (hw:0,0)
14:13:37: Debug: Device: 1: sysdefault
14:13:37: Debug: Device: 2: pulse
14:13:37: Debug: Device: 3: speex
14:13:37: Debug: Device: 4: upmix
14:13:37: Debug: Device: 5: vdownmix
14:13:37: Debug: Device: 6: default
14:13:37: Debug: Device: 0: bcm2835 Headphones: - (hw:0,0)
14:13:37: Debug: Device: 1: sysdefault
14:13:37: Debug: Device: 2: pulse
14:13:37: Debug: Device: 3: speex
14:13:37: Debug: Device: 4: upmix
14:13:37: Debug: Device: 5: vdownmix
14:13:37: Debug: Device: 6: default
14:13:37: Debug: Device: 0: bcm2835 Headphones: - (hw:0,0)
14:13:37: Debug: Device: 1: sysdefault
14:13:37: Debug: Device: 2: pulse
14:13:37: Debug: Device: 3: speex
14:13:37: Debug: Device: 4: upmix
14:13:37: Debug: Device: 5: vdownmix
14:13:37: Debug: Device: 6: default
Invalid MIT-MAGIC-COOKIE-1 key14:13:37: Error: Unable to initialize GTK+, is DISPLAY set properly?
Raspberry Pi4 - Headless 3 - Flatpak 5.6.2-0+b75be76 - stable
System check log:
Checking OpenPlotter autostart... | enabled
Checking rescue mode... | disabled
Checking debugging mode... | disabled
Checking system log file size... | System log file size: 0.54 MB
Checking screensaver state... | enabled
Checking OpenPlotter packages source... | added
Checking serial connections alias... | All your serial connections have an assigned alias
Checking OpenCPN... | running | | FP autostart enabled
↳Unable to read OpenCPN FP configuration
Checking Signal K server... | running
Checking serial connections conflicts... | no conflicts
Checking network connections conflicts... | no conflicts
Checking GPIO conflicts... | no conflicts
CHECK SYSTEM FINISHED