Ralink dongle for comparison:
Linux raspberrypi 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon May 23 21:01:16 2022 from 192.168.1.45
pi@raspberrypi:~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 09da:024f A4Tech Co., Ltd. RF Receiver and G6-20D Wireless Optical Mouse
Bus 001 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 001 Device 003: ID 1546:01a7 U-Blox AG [u-blox 7]
Bus 001 Device 007: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@raspberrypi:~ $ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11 ESSID:"vodafonexxx”
Mode:Managed Frequency:5.5 GHz Access Point: D6:35:1D:07:05:6B
Bit Rate=433.3 Mb/s Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=67/70 Signal level=-43 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:1 Invalid misc:0 Missed beacon:0
wlan1 IEEE 802.11 ESSID:"vodafonexxx”
Mode:Managed Frequency:2.462 GHz Access Point: D4:35:1D:07:05:63
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry short long limit:2 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=69/70 Signal level=-41 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:76 Missed beacon:0
pi@raspberrypi:~ $
(Ssid obfuscated)
Sailoog,
You asked (about SensESP and signal k)
that is what it seems, do you have a link to that example?
Apologies for the delay in responding
https://signalk.org/SensESP/pages/getting_started/
The keys in question are contained in the project template and documented in the section “observe data from the device”
Linux raspberrypi 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon May 23 21:01:16 2022 from 192.168.1.45
pi@raspberrypi:~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 09da:024f A4Tech Co., Ltd. RF Receiver and G6-20D Wireless Optical Mouse
Bus 001 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 001 Device 003: ID 1546:01a7 U-Blox AG [u-blox 7]
Bus 001 Device 007: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@raspberrypi:~ $ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11 ESSID:"vodafonexxx”
Mode:Managed Frequency:5.5 GHz Access Point: D6:35:1D:07:05:6B
Bit Rate=433.3 Mb/s Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=67/70 Signal level=-43 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:1 Invalid misc:0 Missed beacon:0
wlan1 IEEE 802.11 ESSID:"vodafonexxx”
Mode:Managed Frequency:2.462 GHz Access Point: D4:35:1D:07:05:63
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry short long limit:2 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=69/70 Signal level=-41 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:76 Missed beacon:0
pi@raspberrypi:~ $
(Ssid obfuscated)
Sailoog,
You asked (about SensESP and signal k)
that is what it seems, do you have a link to that example?
Apologies for the delay in responding
https://signalk.org/SensESP/pages/getting_started/
The keys in question are contained in the project template and documented in the section “observe data from the device”