2022-01-29, 06:26 PM
We just installed OP 3 64 bit on an pi 4 with 2gb.
Works like a charme. OpenCPN Flat installation worked also fine.
As total noobs we are assuming, that network installation for headless mode isn't realized in the current version. Right?
Thanks for the fast new image
Thomas & Michael
Works like a charme. OpenCPN Flat installation worked also fine.
As total noobs we are assuming, that network installation for headless mode isn't realized in the current version. Right?
Thanks for the fast new image
Thomas & Michael
_____
OP on Raspberry Pi 3+
OpenCPN tactics plugin compiled on raspbian
Step up/step down power converter
AIS and GPS over USB / Serial2USB
Speed data converted directly from Sensor to NMEA by arduino
Wind data: Davis anemometer using Pypilots weather sensor
Pypilot driving Simrad TP22 Tillerpilot
OP on Raspberry Pi 3+
OpenCPN tactics plugin compiled on raspbian
Step up/step down power converter
AIS and GPS over USB / Serial2USB
Speed data converted directly from Sensor to NMEA by arduino
Wind data: Davis anemometer using Pypilots weather sensor
Pypilot driving Simrad TP22 Tillerpilot