This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CLOSED] Issue with Openplotter installation
#1
Hello , here is what I get when trying to install SignalK from .deb package. (On a brand new install of Bullseye).
What should I do ?


Lecture des listes de paquets…
Construction de l'arbre des dépendances…
Lecture des informations d'état…
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :

Les paquets suivants contiennent des dépendances non satisfaites :
 nodejs : Dépend: python-minimal mais il n'est pas installable
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».
sudo: signalkPostInstall : commande introuvable

Cordialement
Didier B
Pi4, SSD USB3, OP 2.9.1
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN  5.8.4 :  Thank you  Thank you  Thank you


Reply
#2
Do you mean openplotter-signalk-installer app from a deb package? you can not do that, you have to install it from openplotter-settings app.

For bullseye use OpenPlotter 3: https://forum.openmarine.net/showthread.php?tid=3878
Reply
#3
(2022-02-04, 08:21 PM)Sailoog Wrote: Do you mean openplotter-signalk-installer app from a deb package? you can not do that, you have to install it from openplotter-settings app.

For bullseye use OpenPlotter 3: https://forum.openmarine.net/showthread.php?tid=3878
You are right (of course !) First I installed Settings from the deb package, I get the message when trying to install signalK  from Settings ...
Anyway  I fodback to buster 'legacy'
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN  5.8.4 :  Thank you  Thank you  Thank you


Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)