|
IMU ICM 20948 de Mikroe
|
2022-02-22, 02:35 AM
it will work with both sensors. However be aware that the icm20948 requires 1.8v levels. If you just connect it up without regulator and translators, you probably damaged it. Some breakouts have these builtin others do not.
If you do not see it from i2cdetect then there is no way it is going to work. |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-21, 12:46 AM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-21, 12:53 AM
RE: IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-22, 01:20 AM
RE: IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-22, 02:34 AM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-22, 02:35 AM
RE: IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-22, 05:57 PM
RE: IMU ICM 20948 de Mikroe - by stelian - 2022-02-22, 08:29 PM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-23, 12:57 AM
RE: IMU ICM 20948 de Mikroe - by stelian - 2022-02-23, 08:16 AM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-23, 10:05 PM
RE: IMU ICM 20948 de Mikroe - by stelian - 2022-02-24, 09:26 AM
|
