|
IMU ICM 20948 de Mikroe
|
2022-02-23, 10:05 PM
If the sensor is working with a different code, then it is most likely just not debugged on RTIMULib2. I don't see any pressing reason to support the sensor in spi mode: there are no real advantages and it takes more wires as well as pins usually used for the lcd and mcu which receives RF remote control signals.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-21, 12:46 AM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-21, 12:53 AM
RE: IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-22, 01:20 AM
RE: IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-22, 02:34 AM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-22, 02:35 AM
RE: IMU ICM 20948 de Mikroe - by NousVoila - 2022-02-22, 05:57 PM
RE: IMU ICM 20948 de Mikroe - by stelian - 2022-02-22, 08:29 PM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-23, 12:57 AM
RE: IMU ICM 20948 de Mikroe - by stelian - 2022-02-23, 08:16 AM
RE: IMU ICM 20948 de Mikroe - by seandepagnier - 2022-02-23, 10:05 PM
RE: IMU ICM 20948 de Mikroe - by stelian - 2022-02-24, 09:26 AM
|
