This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
... connect 1W-sensors to the Connecting HAT (no GPIO4)
#1
Hi!

The connecting HAT has no GPIO4 pin. As I understood, the 1W sensors are on GPIO4 fix. Can I change the GPIO e.g. to GPIO5?

http://www.sailoog.com/en/product/connec...typing-hat

Martin
Reply
#2
It has, GPIO4 AKA GCLK Smile
Anyway you could change the GPIO: https://sailoog.gitbooks.io/openplotter-...18B20.html
Reply
#3
(2016-04-17, 05:17 PM)Sailoog Wrote: It has, GPIO4 AKA GCLK Smile
Anyway you could change the GPIO: https://sailoog.gitbooks.io/openplotter-...18B20.html

Perfect - running. Sorry for asking. I should have read more in detail.

Martin
Reply
#4
Never mind, is good to keep the forum alive Smile
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)