This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
start4.elf not compatible
#1
Hi,

after my experience with Bulleseye and OP V 3.x I decided to use Buster and OP V 2.x with my Raspberry PI 4.
Unfortunately I'm getting into a boot loop at the beginning of the installation. 

Basically there a "two" error messages:

- start4.elf is not compatible
- your board requires a newer software

anyone knows how to fix this?

Thanks
Reply
#2
It's a known issue - as far as I'm aware it's fixed in OP3 but not OP2:

https://forum.openmarine.net/showthread....start4.elf
Reply
#3
Thanks, I "fixed" it by flashing the original Buster image from Raspberry.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)