This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adafruit Ultimate GPS
#1
Hey guys!

I'm trying to get the Adafruit Ultimate GPS play nicely with openPlotter. I can see the data if I'm doing a cpgs -s command so I know its working on ttyS0. IV et declared a NMEA serial input on ttyS0 with baud rate of 115200 (no filter bor filtering). When I open the inspector, I get an error : error : timed out, waiting for data. I see my IMU database alright, but nothing coming from the gps. Any ideas???
Reply
#2
Got it working! For anybody else stumbling on this:

Kill gpsd
Configure it as a serial input on ttyS0 with a baud rate of 9600 and it seems to be working fine. Let me know if anybody want more info on this

sam
Reply
#3
there is an code on git hub mt3339 it is very useful for configuring the GPS. i have tried the gps at higher baud rates but it is not very helpful and some other devices ie my radio wants the data @ 4800. you have to set OP to the correct baud rate.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)