Problem with i2c: enabled | not running

[Sailoog]

Hi all,

great work with OpenPlotter!
I have the version 3 (64bit) on an Raspberry Pi 4 8GB with Raspian 64bit.
I have connected via I2C a Bmp280 Sensor via the adress 0x76.

When I start (boot up) the system, no temperature or pressure signals are transmitted.
Only when I log in dirctly to the screen on Raspian, the system check runs, and from the part where the OpenPlotter packages are checked it transmit all the data colected via I2C.

What can I do here?

Thanks for a good solution!

Mitch

Enable "Auto Login" in Raspberry Pi configuration.