2022-12-19, 08:25 PM
Pin21 didnt work either.
Getting an error messages in signalk dashboard:
Getting an error messages in signalk dashboard:
Filter and convert incomming NMEA messages
|
(2022-12-16, 03:34 PM)Thoma_s Wrote: Ok. it was very straight forward for me in OP2 - my instructions are attached this video may help as well: https://youtu.be/enPFlHpmJVA specifically from the 7:32. GPIO4 (pin 7) worked for me, GPIO25 (pin 22) also worked for me here is a link to the hardware - swap the input resistor for a 10K or add a second 4.7K: https://amzn.to/3FVn391 ST60 wind, ST50 Depth and speed work fine
2022-12-30, 03:20 PM
Thanks for all your help.
Finally got it to work. Soldered a 10K resistor to te opto Gpio 22 And now I see seatalk data in opencpn |
« Next Oldest | Next Newest »
|