This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Victron VenusOS
#1
Would it be possible to add the Victron venusOS software to open plotter for those with victron energy devices?

https://github.com/victronenergy/venus/w...enus-image
Reply
#2
https://github.com/victronenergy/node-re...ib-victron
Reply
#3
(2023-01-01, 06:49 AM)jim321 Wrote: https://github.com/victronenergy/node-re...ib-victron

Yes, I currently have it running as a stand alone system.   It would be good if it were easily intergrated into openplotter.
Reply
#4
https://www.victronenergy.com/live/venus-os:large

it looks looks like all the os uses is node red and Signal K server.
both are already in openplotter.
https://forum.openmarine.net/showthread....ht=Victron
Reply
#5
(2023-01-04, 10:59 AM)jim321 Wrote: https://www.victronenergy.com/live/venus-os:large

it looks looks like all the os uses is node red and Signal K server.
both are already in openplotter.
https://forum.openmarine.net/showthread....ht=Victron

Node red and Signal K are in openplotter, correct   But Venus OS is not is openplotter and that is what I am asking.  


It is the software that Victron run on their cerbo GX and other devices and have made available for free to the community to run on various ARM computers

What it is capable of briefly https://www.victronenergy.com/live/venus-os:start and https://github.com/victronenergy/venus/w...enus-image 

Have a read about it a bit here in practice on a boat https://panbo.com/victrons-venus-os-on-a...iguration/ 

Myself and a lot of other people use the very popular victron products and it would be great to have one highly functional raspberryPI running openplotter,  than have more that one raspberryPI to suit their needs. Also the data can easily run through one signal K server or node red.  Victron has VRM remote portal for remote management of your boats power supply, which is free if you have internet connection.
Reply
#6
all i can say is its been done, years ago.
maybe paddyb, boatingbaileys, tkurki will chime in.
the Victron venusOS is an older version of linux than openplotter uses.

https://www.cruisersforum.com/forums/f13...ost3018205
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)