Today some good news:
Openplotter I2C is working on my orangePi 5 and reading data from my 2 sensors:
BMP280 - 0x77
AHT20 - 0x38
And send data to SignalK.
I have prepared a small instruction (my notes) and if someone wants to follow please just contact me.
Content:
1. OS install
2. NVMe (optional)
3. Update/Upgrade OS
4. VNC
5. GPS (UART0_M2)
6. I2C (I2C5_M3)
7. RTL SDR
8. SDR PLAY
9. SDR++
10. GQRX
11. AIS catcher
12. FLDIGI
13. ADAFRUIT BLINKA
14. OPENPLOTTER SETTINGS
15. OPENPLOTTER I2C
Of course, please keep in mind that openplotter was not written for OrangePi but RasberryPi and some buttons cannot work and some messages are not relevant.
Next step: checking pypilot, sdr uhf
Openplotter I2C is working on my orangePi 5 and reading data from my 2 sensors:
BMP280 - 0x77
AHT20 - 0x38
And send data to SignalK.
I have prepared a small instruction (my notes) and if someone wants to follow please just contact me.
Content:
1. OS install
2. NVMe (optional)
3. Update/Upgrade OS
4. VNC
5. GPS (UART0_M2)
6. I2C (I2C5_M3)
7. RTL SDR
8. SDR PLAY
9. SDR++
10. GQRX
11. AIS catcher
12. FLDIGI
13. ADAFRUIT BLINKA
14. OPENPLOTTER SETTINGS
15. OPENPLOTTER I2C
Of course, please keep in mind that openplotter was not written for OrangePi but RasberryPi and some buttons cannot work and some messages are not relevant.
Next step: checking pypilot, sdr uhf