2023-06-09, 12:17 PM
Yay, I got it working! Thank you so much for this! The amperage looks constant and right (with comparison to my handheld ammeter) but the voltage is still out of whack. with voltmeter battery is at 12.9, and the shunt registers it as 0.9. I have some noname bigass shunt with following markings: 150A, 60 mV, 0,5 (with no units mentioned. Any ideas if this can be calibrated in Signal K or should I modify your source code, and if yes, how?
Thanks a million. This truly is great.
Thanks a million. This truly is great.