This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Signal K connection can not locate bindings file, fresh install!
#1
I have fresh installed 64bit openplotter on a rpi4  according to the installation instruktion. 
It however seems that this image needs update with influxdb and grafana certificate verification.

"Err:7 https://packages.grafana.com/oss/deb stable Release                     
  Certificate verification failed: The certificate is NOT trusted. The certificate chain uses expired certificate.  Could not handshake: Error in the certificate verification. [IP: 151.101.86.217 443]"

I found some guidance on the net to install the latest Grafana and influxdb, but first by installing chrono since the NTP did not work.

Added a usb GPS but got stuck at: 

Error in "Connection & Plugin Status"
Could not locate the bindings file. Tried: → /usr/lib/node_modules/signalk-serv...

I have tried this with two reinstallations, and also stuck at the same point on a upgrade of an earlier openplotter installation.

I have Temporarily got the usb GPS to work but "some, forgot which" upgrade made i fail with the binding to the file error above.
Tried to reinstall  Signal K,  in different ways, several times.

Any guidance?
Reply
#2
I tried reinstallation a third time and now saw that after pushing start of signal K, the post-installation hung at
npm info run socketcan@4.0.3 install
and never finished.

This is probably why I have the "bindings faults"

But what can be done to pass the socketcan@4.0.3 install ?
Reply
#3
try asking the signalk guys > https://signalk-dev.slack.com/join/share...vite/email
Reply
#4
grafana and influxdb changed their certificates, installing the last version of openplotter-dashboards app fixes the problem.
Reply
#5
(2023-04-12, 03:53 PM)Sailoog Wrote: grafana and influxdb changed their certificates, installing the last version of openplotter-dashboards app fixes the problem.

I apologize for the naïve question, but how would I go about installing the last version of openplotter-dashboards? Is there a GUI option, or a command for it?
Reply
#6
https://openplotter.readthedocs.io/en/la...candidates
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)