2023-03-20, 08:57 AM
I think the easiest is to set-up a WIFI access point on the OpenPlotter side (https://openplotter.readthedocs.io/en/2....k_app.html) and check the checkbox "Add ethernet ports to the AP".
On Tinypilot, it may work just out of the box, because there is a script called on boot (/etc/init.d/dhcp.sh) which tries to connect to a dhcp server if an ethernet device is detected... But since you're loading the usbnet kernel modules later, it may not work, and possibly you will have to launch this same script after having loaded the modules. Try it !
On Tinypilot, it may work just out of the box, because there is a script called on boot (/etc/init.d/dhcp.sh) which tries to connect to a dhcp server if an ethernet device is detected... But since you're loading the usbnet kernel modules later, it may not work, and possibly you will have to launch this same script after having loaded the modules. Try it !