2023-05-16, 05:34 AM
Hello all,
I purchased a TinyPilot computer (with zero w) and a weather sensor computer from Sean last year (weather computer even earlier) and I am finally installing everything. I have a Rasberry Pi 3+ with OpenPlotter, as well.
I cannot find any info about the sensor computer. It has a USB Mini connector and a Telephone jack connector. The Davis connector would obviously go into the telephone connector, but I don't know where the USB cable goes. Is it to the Pi or the TinyPilot? The TinyPilot has a USB cable from the Pi to the power in connector and a second USB that I don't have attached to anything. Does it go to the weather computer?
If the cable is connected between the weather computer and the TinyPilot, is the weather data also passed on to the OpenPlotter Pi computer? Same question applies to the IMU data? I originally had an IMU connected to the OpenPlotter computer but I have removed them due to conflicts in the past. I hope all this data gets passed on so it can be put on a dashboard in OpenPlotter.
I purchased a TinyPilot computer (with zero w) and a weather sensor computer from Sean last year (weather computer even earlier) and I am finally installing everything. I have a Rasberry Pi 3+ with OpenPlotter, as well.
I cannot find any info about the sensor computer. It has a USB Mini connector and a Telephone jack connector. The Davis connector would obviously go into the telephone connector, but I don't know where the USB cable goes. Is it to the Pi or the TinyPilot? The TinyPilot has a USB cable from the Pi to the power in connector and a second USB that I don't have attached to anything. Does it go to the weather computer?
If the cable is connected between the weather computer and the TinyPilot, is the weather data also passed on to the OpenPlotter Pi computer? Same question applies to the IMU data? I originally had an IMU connected to the OpenPlotter computer but I have removed them due to conflicts in the past. I hope all this data gets passed on so it can be put on a dashboard in OpenPlotter.