This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multiplexeur
#1
Hello, I have a pi3 with openplotter 9beta 02.
I using a mimiplex-3usb,  create in openplotter usb0, baud 57600. No data in inspector.
I write in lxterminal : sudo stty -F /dev/ttyUS0 460800
All the data is coming, good.
Have you got a solution to automatically a connection usb0.
Thanks for your response.
I am sorry for English, i am French !!!
Reply
#2
Suggest you upgrade to op 0.10.2 and run option autoconfig.
Reply
#3
(2017-04-26, 05:50 AM)SkipperEarly Wrote: Suggest you upgrade to op 0.10.2 and run option autoconfig.

I update 0.10.2 and run autoconfig :

"Auto setup detects hardware. Please make sure that all devices are turned on.


search for tty devices
found: /dev/ttyUSB0 0403 fd4b 31000638 1-1.3:1.0  Future Technology Devices International, Ltd

sort tty devices

check if we have to switch from dev to port
test  ['', '0403', 'fd4b', '31000638', '1-1.3:1.0', 'dev', 'ttyUSB', '/dev/ttyUSB0', '', 'Future Technology Devices International, Ltd', 0]

search for NMEA0183 in tty devices

search NMEA0183 on /dev/ttyUSB0 with baudrate 4800
search NMEA0183 on /dev/ttyUSB0 with baudrate 38400
search NMEA0183 on /dev/ttyUSB0 with baudrate 115200
search NMEA0183 on /dev/ttyUSB0 with baudrate 9600
search NMEA0183 on /dev/ttyUSB0 with baudrate 19200
search NMEA0183 on /dev/ttyUSB0 with baudrate 57600

create an autoname for found NMEA0183 devices

search for NMEA2000 in tty devices
['', '0403', 'fd4b', '31000638', '1-1.3:1.0', 'dev', 'ttyUSB', '/dev/ttyUSB0', '', 'Future Technology Devices International, Ltd', 0]
n2k ['', '0403', 'fd4b', '31000638', '1-1.3:1.0', 'dev', 'ttyUSB', '/dev/ttyUSB0', '', 'Future Technology Devices International, Ltd', 0] 115200
start
search NMEA2000 on /dev/ttyUSB0 with baudrate 115200
not found NMEA2000 on /dev/ttyUSB0 with baudrate 115200

########################## result ################################

add new devices to openplotter.conf
- none -

add new devices to kplex (not activated and no filter)
- none -

"
and now on the lxterminal :
pi@openplotter:~ $ sudo stty -F /dev/ttyUSB0/ 460800

stty: /dev/ttyUSB0/: Not a directory

Huh

Thank for you help.
Reply
#4
OpenPlotter does use kplex.
kplex does work with up to 115200 baud in standard.

But there was a discussion with 460800.
https://groups.google.com/forum/#!msg/kp...HNUJb9EAAJ

It could be that the actual version is capable of 460800. You can try to do the configuration by hand (click "Advanced" button).
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)