Posts: 3
Threads: 2
Joined: Feb 2024
Reputation:
0
Hi,
I have a fleet of vessels I would like to track and display on a webpage. I have a gps feed of their location, speed, heading etc.
Is there a way to show the plotter page on a server and then add the vessel details to the plot so anyone viewing the web page can see the location of the vessels?
Thanks
Jeff
Posts: 3
Threads: 2
Joined: Feb 2024
Reputation:
0
Hi,
Thanks for your reply. I should have been more clear in my initial question. What I want to do is display and OpenCPN map on a web page and then show the position of these vessles on that web page, with course, speed, track log etc.
I would like it on an open CPN map so I can see exactly where they are releative to hazards, depth etc. Each of the vessels will have an Pi hosted open marine system. I bevlive I can host openmarine on a linux box as well. I would like to host on linux, make web accessible and then plot additional custom information onto the OpenCPN map. Before I get too far down the track, is it possible to plot custom info onto the display like this pls? If so, can you point me in the direction of the associated doco.
Thanks
Jeff
Posts: 800
Threads: 46
Joined: Jun 2017
Reputation:
25
2024-02-12, 08:56 AM
(This post was last modified: 2024-02-12, 08:56 AM by jim321.)
ais targets show on the charts.