|
RPM via GPIO pulses
|
2024-03-13, 03:28 PM
When increasing the sampling period the reading got smoother but it still lost half the counts every 10 seconds or so. Also tried to adjust the "rate" in OP GPIO pulses but that did not seem to change anything...not sure what its for actually??
Ended up removing one of the magnets from the flywheel and now have a stable reading:-) |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
RPM via GPIO pulses - by SY Kalinka - 2024-03-03, 06:54 PM
RE: RPM via GPIO pulses - by Boatingbaileys - 2024-03-06, 07:51 PM
RE: RPM via GPIO pulses - by SY Kalinka - 2024-03-13, 03:28 PM
RE: RPM via GPIO pulses - by petere101 - 2024-03-14, 04:59 AM
RE: RPM via GPIO pulses - by Blue Ocean - 2024-03-17, 08:54 PM
RE: RPM via GPIO pulses - by Sailoog - 2024-03-19, 07:34 PM
RE: RPM via GPIO pulses - by TomBrad - 2025-09-19, 12:24 AM
RE: RPM via GPIO pulses - by holgerw - 2025-09-19, 07:42 AM
RE: RPM via GPIO pulses - by holgerw - 2025-09-19, 09:32 PM
|
