2017-07-13, 07:42 PM
Hi !
The problem is "solved" with a NMEA 0183 to USB converter connected to the plotter output, se the pictures in earlier reply, which is configured in Kplex. This connection forwards the long/lat data and the Actisense takes care of the other data.
Also tested the 1W temp sensor which worked very well !!
The problem is "solved" with a NMEA 0183 to USB converter connected to the plotter output, se the pictures in earlier reply, which is configured in Kplex. This connection forwards the long/lat data and the Actisense takes care of the other data.
Also tested the 1W temp sensor which worked very well !!