2024-12-20, 04:57 PM
(2024-04-01, 01:25 PM)Lucas23 Wrote: I just got my raspi 4B and tried to install everything on the boat last weekend. I first tried to set everything up together, everything worked except for the Seatalk input, I got the LED blinking on the HAT, but no input in SignalK after setup with GPIO app. I then tried to work with just the Seatalk on the hat, but it still didn't show incoming data except from the LED. Is there something I am missing or did anyone have the same problem? I managed to get the NMEA 2000 data, but no Seatalk.low’s adventuresEnsure the GPIO pins for SeaTalk are correctly configured in the SignalK GPIO app. Double-check the pin assignments match your HAT’s documentation.