2017-06-10, 06:34 PM
(2017-06-10, 05:29 PM)jswalwell Wrote: Trying to interface an openplotter setup to an older Raymarine ST6000/300 autopilot.
I would have thought that the MWV sentence from my CV7 ultrasonic wind sensor could be converted from available data to VWR for this ancient and unfriendly autopilot that only accepts VWR. I have set an output to send VWR, but no VWR sentence is being generated on the output. I can send MWV on the output as well as other sentences. Any advice appreciated. Also, if anyone can recommend a seatalk1 to nmea bridge, or method to do so, I am all ears.
I am using the v0.10.0alpha image. The v0.8.0 image off of the sailoog website (directs to Mega download) cannot output anything. Please let me know if there is a stable functional non-alpha image that I should download from somewhere else.
How did you "set an output to send VWR,"? It should be quite easy in node red t read the MWV message and send it out again as a VWR message. I did similar to create a message the Opencpn logbook could read.
Sent from my SGP511 using Tapatalk