This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
usb manager arduino
#1
unable to add usb in manager.
i am trying to add arduino firmata it wont let me name a new port .

auto setup 

test  ['', '2341', '0042', '554313133383518150E0', '1-1.5.1:1.0', 'dev', 'ttyACM', '/dev/ttyACM0', 'Mega 2560 R3 (CDC ACM)', 'Arduino SA', 0]

lsusb


Bus 001 Device 010: ID 0bda:2832 Realtek Semiconductor Corp. RTL2832U DVB-T
Bus 001 Device 007: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 001 Device 006: ID 2341:0042 Arduino SA Mega 2560 R3 (CDC ACM)d 

and node-red cant use arduino node. "serialport problem"?

[warn] [arduino] Error: Could not locate the bindings file. Tried:
 → /home/pi/.node-red/node_modules/serialport/build/serialport.node
 → /home/pi/.node-red/node_modules/serialport/build/Debug/serialport.node
 → /home/pi/.node-red/node_modules/serialport/build/Release/serialport.node
 → /home/pi/.node-red/node_modules/serialport/out/Debug/serialport.node
 → /home/pi/.node-red/node_modules/serialport/Debug/serialport.node
 → /home/pi/.node-red/node_modules/serialport/out/Release/serialport.node
 → /home/pi/.node-red/node_modules/serialport/Release/serialport.node
 → /home/pi/.node-red/node_modules/serialport/build/default/serialport.node
 → /home/pi/.node-red/node_modules/serialport/compiled/6.11.0/linux/arm/serialport.node

PI 3-B new install upgraded to beta

Thanks  any help appreciated.
Jim
Reply
#2
FIXED 
i reinstalled and started over ..
and got arduino in usb manager.
had too do this to go headless.

sudo apt-get purge realvnc* xrdp
sudo apt-get install xrdp

jim
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)