Hi Jürgen,
here's what I did after stopping openplotter:
- open terminal
- cd .config/openplotter
- nano openplotter.conf
- ^w i2c
- at this location I found:
changed it to
- ^x and save the openplotter.conf
- restart signalk-server
Hope, this helps.
Greets, uli
here's what I did after stopping openplotter:
- open terminal
- cd .config/openplotter
- nano openplotter.conf
- ^w i2c
- at this location I found:
Code:
sensors = [['BMP180', 'rtimulib.press.2.0x77', [['environment.outside.pressure', 1.0, 0.0], ['', 1.0, 0.0]]]]
Code:
sensors = [['BMP180', 'rtimulib.press.2.0x77', [['environment.outside.pressure', 1.0, 0.0], ['environment.inside.temperature', 1.0, 0.0]]]]
- restart signalk-server
Hope, this helps.
Greets, uli