SignalK to Influxb 2 plugin issue

[NickL123]

I had a similar issue on a test machine and basically the "UUID" of the system changes after reboots, unless you add an MMSI to the system.  once this is done, every reboot will result in the same ID

Thanks Jason for your time taken to respond.     I did enter the MMSI in SignalK configuration when I initially installed OP4 but I will pay attention to UUID as I did not think of that possibility.     I will also enable plug-in log which hopefully will reveal something. 

Everything else on the system works OK as far as I can tell.  It is just InfluxDB2 plug-in which seems to be the issue.  

Thanks again 

Nick