2024-10-11, 04:31 PM
(2024-10-11, 10:42 AM)wernerweg Wrote: I have a similar problem on a Rpi 5 running openplotter 4. After boot in the signal k dashboard it just says for signalk-to-influxdb2 "started" and no data is written to influxdb. When I restart signal k or go to the plugin configuration and press (w/o doing any changes) "submit", then the corresponding influxdb bucket is displayed and data is written. This works up to the next reboot. BTW I entered the MMSI, it does not save the problem.
Thank's for all the effort.
Werner
Hi Werner
Thank you for confirming the issue on your end.
I did end up rebuilding my RPI5 + McArthur hat with fresh image and the issue returned. As you pointed out, data to InfluxDB2 will be written for as long as the system is up and running.
Regards