2017-06-29, 07:11 PM
(This post was last modified: 2017-06-29, 07:19 PM by benjamingotke.)
Think i got it : Restarting Pi now
Okay
I went to /.config/openplotter/openplotter.conf
change enable 1 to enable 2 at wlan
went to /etc/network/interfaces
change eth0 dhcp to eth0 static and wrote what I had to do.
Restart Pi
Opened /etc/network/interfaces and got this:
No AP over wlan0 anymore..
Must set enable back to 1 and try something else.
I've triet but bridge to eth0, but is it not seems working correctly.
I'll try again in a moment and paste what I get.
Okay
I went to /.config/openplotter/openplotter.conf
change enable 1 to enable 2 at wlan
went to /etc/network/interfaces
change eth0 dhcp to eth0 static and wrote what I had to do.
Restart Pi
Opened /etc/network/interfaces and got this:
Code:
File: /etc/network/interfaces
allow-hotplug usb0
iface usb0 inet static
address 192.168.42.100
netmask 255.255.255.0
No AP over wlan0 anymore..
Must set enable back to 1 and try something else.
I've triet but bridge to eth0, but is it not seems working correctly.
I'll try again in a moment and paste what I get.