This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enable Wifi on OpenPlotter OS on Pi3
#1
I am currently setting up OpenCPN on a rapberry Pi 3 with OpenPlotter OS. Ideally i want to be able to connect the Pi to the WiFi network, but the option is not there on OpenPlotter. It shows WiFi management not available. Is there anyway to enable this through a command terminal? Thankyou!!
Reply
#2
(2017-07-16, 04:36 PM)BMMRO Wrote: I am currently setting up OpenCPN on a rapberry Pi 3 with OpenPlotter OS. Ideally i want to be able to connect the Pi to the WiFi network, but the option is not there on OpenPlotter. It shows WiFi management not available. Is there anyway to enable this through a command terminal? Thankyou!!

Sounds like the wifi access point is enabled, if you disable that and click on the networks icon top right of the screen you should see available networks. 

https://sailoog.gitbooks.io/openplotter-...fi-ap.html
Reply
#3
(2017-07-16, 04:42 PM)PaddyB Wrote:
(2017-07-16, 04:36 PM)BMMRO Wrote: I am currently setting up OpenCPN on a rapberry Pi 3 with OpenPlotter OS. Ideally i want to be able to connect the Pi to the WiFi network, but the option is not there on OpenPlotter. It shows WiFi management not available. Is there anyway to enable this through a command terminal? Thankyou!!

Sounds like the wifi access point is enabled, if you disable that and click on the networks icon top right of the screen you should see available networks. 

https://sailoog.gitbooks.io/openplotter-...fi-ap.html

That worked!! Thanks for your help!!
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)