Mac Arthur HAT power module and PI5 shutdown sequence

[Rosea]

Hi all!
Is your Mac Arthur Hat power module capable running the Pi5 and NVME SSD with a monitor connected? I just tried and it can't run my 10inch touchscreen obviously. The LED lights on the power module for 5v and 12V are both active. So I fear the module can't deliver enough power. Raspberry boots, but the monitor won't show up. Or the power module is fried. It's only working if I connect USB power the monitor. The PI4 worked well.
Best regards Dominik

[Rosea]

Well got it running. Problem was a faulty step down regulator for the usb Hub.
One thing that changed though: switching 12v SW off, now just show up the menu for shutting down. Is there a way to initiate a safe shutdown without having to confirm in the first place?

[Sailoog]

If you follow this, the shutdown will show the menu but it will shutdown safely after few seconds:

https://macarthur-hat-documentation.read...figuration

[Rosea]

Thanks for your quick answer. I did follow exactly this instructions. strange....