Lenght will depend on the modules you are stacking, in my case (NVMe solid state memory module + Raspberry Pi 5 + MacArthur HAT) I used:
Wow! I love your remix!
I will look at the problem you found when not using the NVMe module. I was thinking about getting another raspberry Pi 5 for a different project and I will use it to test your configuration.
Note: (I don't know where you live but here in Spain in the Leroy Merlin hardware stores they have blisters with different lengths of 2.5mm screws in small quantities.)
- 4 M3x50 (3 mm diameter x 50 mm length) nut and bolt, securing the corners of the case.
- 4 M2,5x8 (2.5 mm diameter x 8 mm length) for attaching the boards stack to the base.
- 4 M4x10 (4 mm diameter x 10 mm length) wood screws to attach the fixed holder to a suitable base.
(2025-06-17, 10:42 AM)gpatsiaouras Wrote:
![[Image: IMG-1885-HEIC.jpg]](https://i.ibb.co/zW7hBBV7/IMG-1885-HEIC.jpg)
Wow! I love your remix!
I will look at the problem you found when not using the NVMe module. I was thinking about getting another raspberry Pi 5 for a different project and I will use it to test your configuration.
Note: (I don't know where you live but here in Spain in the Leroy Merlin hardware stores they have blisters with different lengths of 2.5mm screws in small quantities.)