Cannot access SignalK

[Lazzz]

I just updated SK Installer in the Settings App because it said to Open the app in the "Pending tasks".

I did all that was required & now I cannot access SK!!

Anything with "localhost:3000" will not open in the browser.

What do I need to do please???

[Lazzz]

Did anybody else update the SK Installer in the settings???

Did it work???

If I Enable SSL I can open SK in the browser with localhost:3443, but I get a warning about being Not Secure, so I know SK is running!!

If I disable SSL, with the browser open using localhost:3443, I can then open localhost:3000 but as soon as I close localhost:3443 I cannot open anything with localhost:3000.

I don't really want to reinstall SignalK.

[beercansailor]

I see the same problem after updating SignalK to version 2.14.0 yesterday.
After the update, SignalK can no longer be accessed at localhost:3000 (or whatever your port number is).
You can however access SignalK at address 10.42.0.1:3000 (or whatever your port number is)

This is if you have the default setup. You can check the IP address by looking in OpenPlotter-Settings under the Network tab "Signal K - Admin (Server)". That also shows the port number you have programmed for accessing SignalK.

[Flo]

I see the same problem after updating SignalK to version 2.14.0 yesterday.
After the update, SignalK can no longer be accessed at localhost:3000 (or whatever your port number is).
You can however access SignalK at address 10.42.0.1:3000 (or whatever your port number is)

This is if you have the default setup. You can check the IP address by looking in OpenPlotter-Settings under the Network tab "Signal K - Admin (Server)". That also shows the port number you have programmed for accessing SignalK.

I have the same problem after updates today and the adress 10.42.0.1:3000 doesn’t work either. Please help ! Thank you

[beercansailor]

What I would do:
1. Check if SK is running by opening the OP Settings app, and running "Check System"
If not running, maybe this tread will help: https://forum.openmarine.net/showthread.php?tid=6198
2. Check your network in the OP Settings app by looking at the "Network" tab
This should show the "Signal K - Admin (server)" info, giving you the TCP protocol, IP address and port number with which you should be able to access the SK admin page

[Lazzz]

Still not working after installing Signal K from scratch.

Signal K is definitely running but when I try to open localhost:3000 in a browser I just get the "loading" sign & then it goes to "This page isn't working" & will not reload.

Could this be a plugin because it was working until I loaded some Node Red flows?

If I "Enable SSL" SK will open with localhost:3443 but I have to bypass the "Your connection is not private" & "Proceed to localhost (unsafe) & login to get access to SignalK

[beercansailor]

What do you observe when trying to access
10.42.0.1:3000
?

[PaddyB]

There was a problem with old versions of node (18) with 2.14.0. Being fixed now. The signalk discord is the place to ask & look for signalk issues.
Looks like worth update node ayway
https://github.com/SignalK/signalk-serve...ng-Node.js

[Lazzz]

Yeah, I updated to v20 & it is working again.

I found this after I spent a day reinstalling signalK & doing all the plugins etc.

[PaddyB]

Yeah, I updated to v20 & it is working again.

I found this after I spent a day reinstalling signalK & doing all the plugins etc.

It's all discussed on the signalk discord, best place to look. Link is in https://signalk.org/
https://discord.com/invite/uuZrwz4dCS
Would have saved yourself a day 

Just now on discord >  "2.14.4 is now out and works with node v18+"