This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OpenCPN 4.8.0 won't start on OpenPlotter 14.4
#5
Sailoog,

Thanks for the reply. I don't normally start OpenCPN as sudo and did this just to see if that helped.

Unfortunately there is no error displayed when I launch OpenCPN, either from terminal or using the deskptop link. The opencpn process starts and consumes high cpu (seems to be 100% CPU on one core) but the window never appears. The only time time an error message is displayed (or anything written to a log - see the log contents in my earlier post) is when I run opencpn as sudo or using the -p parameter. Of course, I don't know if these errors are the reason why the opencpn window isn't visible or are unrelated issues caused by running opencpn as sudo or with -p.

The issue started after I upgraded OpenCPN to 4.8.0 and OpenPlotter to 14.4 - I don't know which upgrade caused the problem. I haven't intentionally set the system to use opengl - I don't know how to do this so assume opengl isn't enabled, but can you let me know how to check this please and I'll make sure opengl is turned off?

Thanks,

Jon
Reply


Messages In This Thread
RE: OpenCPN 4.8.0 won't start on OpenPlotter 14.4 - by dorsetjon - 2017-09-04, 10:30 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)