2026-06-12, 06:03 PM
Update on the boards:
I tested the board voltages and the regulators are working fine. After resolving a few minor issues, I was able to successfully upload the bootloader and firmware.
I've now tested all the main functionality, and everything appears to be working as expected. So far, I've tested the current capability up to around 6A, as I don't currently have a larger load available. No issues whatsoever were observed during testing.
Later today, I'm planning to pick up some 9004 halogen bulbs and connect them in parallel to create a heavier test load. That should allow me to push the board beyond to its intended operating limits. I'll share more results once I've completed those tests.
I tested the board voltages and the regulators are working fine. After resolving a few minor issues, I was able to successfully upload the bootloader and firmware.
I've now tested all the main functionality, and everything appears to be working as expected. So far, I've tested the current capability up to around 6A, as I don't currently have a larger load available. No issues whatsoever were observed during testing.
Later today, I'm planning to pick up some 9004 halogen bulbs and connect them in parallel to create a heavier test load. That should allow me to push the board beyond to its intended operating limits. I'll share more results once I've completed those tests.