Probléme Wifi

[PhilCoppo]

Bonjour
J'ai paramétré le hotspot wifi sur mon Raspberry Pi5. Cela a fonctionné 2 jours et depuis j'arrive à me connecter au réseau du bateau, mais impossible de recevoir les données GPS ou de voir.
Quelqu'un aurait-il eu le même problème ou si quelqu'un a une idée du problème.
Par avance merci.

Hello,
I set up the Wi-Fi hotspot on my Raspberry Pi 5. It worked for two days, and since then I can connect to the boat's network, but I can't receive GPS data or see anything.
Has anyone else had this problem, or does anyone have any idea what the issue might be?

Thanks in advance.

[Blue Ocean]

How is your GPS connected to the Pi?
What software are you running on the Pi?

People need more info to be able to help.

[PhilCoppo]

Bonjour
mon gps est branché via un port USB, j'utilise openplotter dernière version, je renvois les infos du gps via signal k en NMEA0183.

Hello, my GPS is connected via a USB port. I'm using the latest version of OpenPlotter, and I'm sending GPS data via NMEA0183's K-signal.

[saltwaterone]

Bonjour
mon gps est branché via un port USB, j'utilise openplotter dernière version, je renvois les infos du gps via signal k en NMEA0183.

Hello, my GPS is connected via a USB port. I'm using the latest version of OpenPlotter, and I'm sending GPS data via NMEA0183's K-signal.

Sorry if I misunderstood the question, but is your issue with wifi or the USB GPS connection?  It seems you can now connect via wifi, but I am not clear whether the GPS has ever been visible to you in SK, or have you never been able to see that (have you ever successfully seen the NMEA0183 data from the GPS in SK)?   If the latter, that is, wifi connection now works and you can access SK, but cannot see GPS data in SK (USB attached GPS data has never been visible in SK), you may need to simply build a path to parse the NMEA sentences.  If this describes your issue, you can download the plugin called something like "XDR NMEA0183 sentence parser" from the SK plugin screen, then "add" that device by filling in the relevant fields, and SK should see it and be able to parse that input just fine.