Posts: 45
Threads: 14
Joined: Aug 2020
Reputation:
0
Hi,
So this is a pretty neat project I've been working on. I got a waveshare esp32-display unit and decided to see if claude code was worth its salt. So I managed to build a secondary display that shows all the necessary parametres.
It fetches data from MQTT broker and displays it. You can choose the data source from the UI and use three different color schemes.
AIS page displays 5 nearest AIS targets within one nautical mile over a map, if you are within the preloaded mbtiles map area. Otherwise it switches to radar scope. Last page controls Shelly realys, so I can switch ie navigation lights from aft deck.
I have to say, I was quite surprised of this little cheap unit's capabilities. It has CAN and RS485 ports, so in the future interacting with NMEA networks is possible.
Data is fed from simulator esp in this instance, haven't had a change to mount it in my boat yet.
Posts: 31
Threads: 4
Joined: May 2026
Reputation:
0
(2026-08-05, 08:01 PM)"Tuomas_S Wrote: Hi,
So this is a pretty neat project I've been working on. I got a waveshare esp32-display unit and decided to see if claude code was worth its salt. So I managed to build a secondary display that shows all the necessary parametres.
It fetches data from MQTT broker and displays it. You can choose the data source from the UI and use three different color schemes.
AIS page displays 5 nearest AIS targets within one nautical mile over a map, if you are within the preloaded mbtiles map area. Otherwise it switches to radar scope. Last page controls Shelly realys, so I can switch ie navigation lights from aft deck.
I have to say, I was quite surprised of this little cheap unit's capabilities. It has CAN and RS485 ports, so in the future interacting with NMEA networks is possible.
Data is fed from simulator esp in this instance, haven't had a change to mount it in my boat yet.
I just saw this after I posted details of a project Im working on to display signalk data on tft displays like this. The reality is that if I didnt already have a few displays collecting dust, I would have probably used these waveshare displays, they seem killer for the price, plus it would have saved me a bunch of time. Curiously, how does the firmeare work with those, do they include some bundled firmware to set up the display (brightness, standby time, etc., ) that you then tweak to render the stuff you want to display, or are they jusy the display and an esp32 such that all rendering, I/O, etc, is done using standard libraries (ie the UI is from their firmware), or did you do this with unmodified firmware, just entering the MQTT server details and presumably some path to the datasource, or does it speak native NMEA2000 such that you just told it what data you wanted to display from the wire (or something else)? Either way, it looks cool and I agree for the price its killer.
Posts: 45
Threads: 14
Joined: Aug 2020
Reputation:
0
2026-08-19, 08:16 AM
(This post was last modified: 2026-08-19, 06:10 PM by Tuomas_S.)
(2026-08-19, 01:50 AM)saltwaterone Wrote: (2026-08-05, 08:01 PM)"Tuomas_S Wrote: Hi,
So this is a pretty neat project I've been working on. I got a waveshare esp32-display unit and decided to see if claude code was worth its salt. So I managed to build a secondary display that shows all the necessary parametres.
It fetches data from MQTT broker and displays it. You can choose the data source from the UI and use three different color schemes.
AIS page displays 5 nearest AIS targets within one nautical mile over a map, if you are within the preloaded mbtiles map area. Otherwise it switches to radar scope. Last page controls Shelly realys, so I can switch ie navigation lights from aft deck.
I have to say, I was quite surprised of this little cheap unit's capabilities. It has CAN and RS485 ports, so in the future interacting with NMEA networks is possible.
Data is fed from simulator esp in this instance, haven't had a change to mount it in my boat yet.
I just saw this after I posted details of a project Im working on to display signalk data on tft displays like this. The reality is that if I didnt already have a few displays collecting dust, I would have probably used these waveshare displays, they seem killer for the price, plus it would have saved me a bunch of time. Curiously, how does the firmeare work with those, do they include some bundled firmware to set up the display (brightness, standby time, etc., ) that you then tweak to render the stuff you want to display, or are they jusy the display and an esp32 such that all rendering, I/O, etc, is done using standard libraries (ie the UI is from their firmware), or did you do this with unmodified firmware, just entering the MQTT server details and presumably some path to the datasource, or does it speak native NMEA2000 such that you just told it what data you wanted to display from the wire (or something else)? Either way, it looks cool and I agree for the price its killer.
I think waveshare provides necessary libraries and some were written by Claude. Brightness is fixed, no way of changing that. Will look into that later, will include soldering... The whole firmware was written by Claude code but waveshares are well documented. It does provide CAN port so enabling NMEA2000 shoulnd't be a problem, I just don't have any 2000 devices to test it with. Right now it connects to SignlaK and mqtt bridge throgh wifi.
|